A world of possibilities. One layer at a time.
NEXORA3D TECH
Material research studio concept

THE NEXORA MATERIAL GUIDE

Choose the material.
Shape the possibility.

Look beyond color. Compare feel, finish and printing considerations before your next build.

Start with the job
your print needs to do.

Material properties depend on formulation, moisture, print orientation and geometry. These profiles are selection guidance, not NEXORA laboratory test results. Printing temperatures must never be used as safe operating temperatures.

Read heat claims carefully. No grade-specific NEXORA heat-deflection or continuous-use temperature data has been verified here. For a heat-exposed, load-bearing or regulated application, request the relevant technical data and validate the finished part.
PLA Pro creative application concept

MATERIAL PROFILE

PLA Pro

Label printing settings
Nozzle: 200–220°C · Bed: 0–60°C · Diameter: 1.75 mm
Feel & flexibility
Rigid
Explore making
Everyday models, desk organizers, display pieces
Printing perspective
Start here for crisp details and everyday creative prints.
Heat & limits
Low heat tolerance is typical of PLA. Keep away from hot cars and direct heat; no NEXORA heat rating is verified.
Explore PLA Pro

Creative illustration · Not a tested application or included product.

Dual Color Silk PLA+ creative application concept

MATERIAL PROFILE

Dual Color Silk PLA+

Label printing settings
Nozzle: 200–220°C · Bed: 0–60°C · Diameter: 1.75 mm
Feel & flexibility
Rigid
Explore making
Vases, sculptures, decorative gifts
Printing perspective
Two-tone visual effects change with viewing angle, model shape and orientation.
Heat & limits
Choose for visual finish. Do not assume PLA+ or silk additives improve heat or structural performance.
Explore Dual Color Silk PLA+

Creative illustration · Not a tested application or included product.

Tricolor Silk PLA+ creative application concept

MATERIAL PROFILE

Tricolor Silk PLA+

Label printing settings
Nozzle: 200–220°C · Bed: 0–60°C · Diameter: 1.75 mm
Feel & flexibility
Rigid
Explore making
Sculptures, ornaments, display collections
Printing perspective
Three-color effects reward curved surfaces and changing light.
Heat & limits
The listed nozzle range is 200–220°C and bed range 0–60°C. These are printing settings, not service temperatures.
Explore Tricolor Silk PLA+

Creative illustration · Not a tested application or included product.

Solid & Transparent PETG creative application concept

MATERIAL PROFILE

Solid & Transparent PETG

Label printing settings
Nozzle: 220–250°C · Bed: 60–100°C · Diameter: 1.75 mm
Feel & flexibility
Rigid, with some give
Explore making
Organizers, light-transmitting decorative objects, housings
Printing perspective
Explore solid, translucent and sparkling colors. Layer structure affects transparency.
Heat & limits
PETG generally handles more warmth than PLA, but this is not a verified temperature rating for this product.
Explore Solid & Transparent PETG

Creative illustration · Not a tested application or included product.

High Strength PETG creative application concept

MATERIAL PROFILE

High Strength PETG

Label printing settings
Nozzle: 220–250°C · Bed: 60–100°C · Diameter: 1.75 mm
Feel & flexibility
Rigid
Explore making
Practical prototypes, brackets, enclosures
Printing perspective
Balance useful geometry, wall count and layer orientation. The series name is not a load rating.
Heat & limits
Verify expected temperature and load with grade-specific testing before functional use.
Explore High Strength PETG

Creative illustration · Not a tested application or included product.

TPU 70A High Elastic creative application concept

MATERIAL PROFILE

TPU 70A High Elastic

Feel & flexibility
Shore 70A · Very soft
Explore making
Soft sleeves, flexible shapes, cushioning concepts
Printing perspective
Among this range, 70A is a softer option. A constrained extrusion path is especially important.
Heat & limits
Hardness does not specify heat resistance. No grade-specific service-temperature data is verified.
Explore TPU 70A High Elastic

Creative illustration · Not a tested application or included product.

TPU 85A Foaming creative application concept

MATERIAL PROFILE

TPU 85A Foaming

Feel & flexibility
Shore 85A · Flexible
Explore making
Lightweight flexible concepts, textured forms
Printing perspective
Foaming behavior and final density depend on the printing process; test small parts first.
Heat & limits
Nominal hardness alone does not predict printed softness, density or thermal behavior.
Explore TPU 85A Foaming

Creative illustration · Not a tested application or included product.

TPU 90A Matte creative application concept

MATERIAL PROFILE

TPU 90A Matte

Feel & flexibility
Shore 90A · Flexible
Explore making
Grips, protective sleeves, flexible organizers
Printing perspective
Matte red and fluorescent yellow offer a softer visual finish.
Heat & limits
Final flexibility depends on wall thickness, infill and geometry. No service-temperature rating is verified.
Explore TPU 90A Matte

Creative illustration · Not a tested application or included product.

TPU 95A Glossy creative application concept

MATERIAL PROFILE

TPU 95A Glossy

Feel & flexibility
Shore 95A · Firm flexible
Explore making
Flexible covers, bumpers, practical accessories
Printing perspective
Glossy orange and yellow bring a vivid finish to flexible forms.
Heat & limits
95A is generally firmer than 70A–90A on the same Shore scale. It is not a heat-resistance value.
Explore TPU 95A Glossy

Creative illustration · Not a tested application or included product.

TPU 95A Matte creative application concept

MATERIAL PROFILE

TPU 95A Matte

Feel & flexibility
Shore 95A · Firm flexible
Explore making
Soft-touch concepts, sleeves, sculptural forms
Printing perspective
A skin-tone matte option. Color naming does not establish skin-contact safety.
Heat & limits
Verify contact suitability separately. No skin-contact certification or heat rating is claimed.
Explore TPU 95A Matte

Creative illustration · Not a tested application or included product.

TPU 95A Glow creative application concept

MATERIAL PROFILE

TPU 95A Glow

Feel & flexibility
Shore 95A · Firm flexible
Explore making
Novelty accessories, decorative accents
Printing perspective
Glow yellow adds a light-dependent effect; test brightness and appearance in your environment.
Heat & limits
Not a safety marker or emergency-lighting material. Glow effect is not a performance certification.
Explore TPU 95A Glow

Creative illustration · Not a tested application or included product.

TPU 64D Glossy creative application concept

MATERIAL PROFILE

TPU 64D Glossy

Feel & flexibility
Shore 64D · Hard TPU
Explore making
Firm flexible prototypes, protective-form concepts
Printing perspective
Shore D uses a different scale from Shore A; do not compare the numbers directly.
Heat & limits
No conversion to a verified Shore A value or service-temperature rating is provided.
Explore TPU 64D Glossy

Creative illustration · Not a tested application or included product.

Wood-Look Filament creative application concept

MATERIAL PROFILE

Wood-Look Filament

Label printing settings
Nozzle: 190–210°C · Bed: 0–60°C · Diameter: 1.75 mm
Feel & flexibility
Formulation-dependent
Explore making
Planters used with liners, vases, decor, desk objects
Printing perspective
Five natural-looking shades offer a warmer aesthetic. Exact wood content is not verified.
Heat & limits
Do not infer genuine wood content, biodegradability, food-contact safety or heat resistance from appearance.
Explore Wood-Look Filament

Creative illustration · Not a tested application or included product.

Nylon Filament creative application concept

MATERIAL PROFILE

Nylon Filament

Label printing settings
Nozzle: 250–280°C · Bed: 100–120°C · Diameter: 1.75 mm
Feel & flexibility
Grade-dependent
Explore making
Functional prototypes, mechanical-form exploration
Printing perspective
Moisture management is important. Confirm nylon grade, printer compatibility and drying instructions first.
Heat & limits
Nylon grade, net weight and service-temperature rating need supplier confirmation. The photographed labels specify 1.75 mm diameter, 250–280°C printing and a 100–120°C bed.
Explore Nylon Filament

Creative illustration · Not a tested application or included product.